This radio was sold at the Radio Attic!

the Radio Attic
To see more of this seller's radios, visit Tom Hunt's Radio Attic.

Burns Pyralin Horn Speaker (1925)
(speaker)

Burns Pyralin Horn Speaker (1925)

THIS RADIO HAS BEEN SOLD!

Here's a beautiful, all-original Burns radio horn with an excellent, undamaged pyralin bell. The speaker was manufactured by the American Electric Co. in Chicago in 1925 and designed to be used with high end battery radios. Among the most beautiful and the most collectible of all 1920s horn speakers, Burns horns are also among the most fragile. If the speaker is not handled carefully, its leaves can crack and break, which is why you seldom find these speakers in acceptable condition, much less looking as nice as this one. The bell is perfectly formed and original throughout, with a beautiful sheen both inside and out. No missing pieces of pyralin, no cracks, no warps, no hairlines. All of the leaves are joined tightly at the seams. The paint on the elbow, base and driver housing is original, with very little wear. Not a repaint anywhere; polished with Novus 2. The speaker has been tested and still works great. It is ideally suited for any 1920's radio but is perhaps most often seen with early Atwater Kent breadboards. It is 21" tall, with a bell diameter of 12-1/2". Shipping weight, properly packed, will be approximately 25 lb.

Burns Pyralin Horn Speaker (1925)

THIS RADIO HAS BEEN SOLD!

Here's a beautiful, all-original Burns radio horn with an excellent, undamaged pyralin bell. The speaker was manufactured by the American Electric Co. in Chicago in 1925 and designed to be used with high end battery radios. Among the most beautiful and the most collectible of all 1920s horn speakers, Burns horns are also among the most fragile. If the speaker is not handled carefully, its leaves can crack and break, which is why you seldom find these speakers in acceptable condition, much less looking as nice as this one. The bell is perfectly formed and original throughout, with a beautiful sheen both inside and out. No missing pieces of pyralin, no cracks, no warps, no hairlines. All of the leaves are joined tightly at the seams. The paint on the elbow, base and driver housing is original, with very little wear. Not a repaint anywhere; polished with Novus 2. The speaker has been tested and still works great. It is ideally suited for any 1920's radio but is perhaps most often seen with early Atwater Kent breadboards. It is 21" tall, with a bell diameter of 12-1/2". Shipping weight, properly packed, will be approximately 25 lb.

Reported sold by Tom Hunt on October 8, 2020
Listed price on date of sale - $529.00
Back to Top

Home Page  |  Radios for Sale  |  Radios by Manufacturer  |  Radios by Style  |  Terms & Conditions  
FAQ  |  New Radios!  |  What's ON SALE?  |  How to Buy  |  The NEW Price Guide  
Sold Radios  |  Sold Radios by Manufacturer  |  Sold Radios by Style  |  One-Day Wonders!  |  What's My Radio Worth?  
eBay? eBay??  |  Archives  |  Site Map  |  Links  |  E-mail Friendly Webmaster  

Radios for sale at the Radio Attic are offered by independent advertisers and not by the Webmaster.
Sellers are identified at the top of each page.  You must directly contact the seller to purchase a radio.

© 1999, 2024  the Radio Attic