Click on the link above to contact the seller or e-mail To see more of this seller's radios, visit Greg Van Beek's Nostalgia Radio Attic.

Manufactured by International Radio Corporation of Ann Arbor, MI, this simple four-tube plus ballast Kadette has a uniquely designed cabinet, utilizing slots as opposed to lattice work for its grille. The wood cabinet finish is original, save for the top which was refinished using matching toner and the whole cabinet was topped with a light coat of clear enamel to maintain sheen and durability. The AM/short wave chassis has been gone through with all new wax and filter capacitors, a strong tested set of tubes, new line cord. The controls were cleaned and lubricated to make them move smoothly again. Requires its long wire to be attached to an external antenna source to receive stations. This is one of those circuits where the antenna is connected directly to the volume control, so the louder you turn the volume, the stronger the stations come in. There is no AVC, so you have to adjust the volume as you tune. As such, my standard add-on 3.5mm cord could not be installed on this unit. 13-1/2"W x 9"H x 6"D.  $159.00. (1790261)

I offer a quantity discount on my radios, so check out my other listings and drop me a line if you're interested in more than one at a time. A Bluetooth/MP3 player 3.5mm cord has been installed at no additional charge when the circuit design allows for another listening option beyond the standard AM broadcasts. You can plug in to the headphone port of your device and enjoy the music of your choice through the radio or unplug for standard AM broadcasts.

Manufactured by International Radio Corporation of Ann Arbor, MI, this simple four-tube plus ballast Kadette has a uniquely designed cabinet, utilizing slots as opposed to lattice work for its grille. The wood cabinet finish is original, save for the top which was refinished using matching toner and the whole cabinet was topped with a light coat of clear enamel to maintain sheen and durability. The AM/short wave chassis has been gone through with all new wax and filter capacitors, a strong tested set of tubes, new line cord. The controls were cleaned and lubricated to make them move smoothly again. Requires its long wire to be attached to an external antenna source to receive stations. This is one of those circuits where the antenna is connected directly to the volume control, so the louder you turn the volume, the stronger the stations come in. There is no AVC, so you have to adjust the volume as you tune. As such, my standard add-on 3.5mm cord could not be installed on this unit. 13-1/2"W x 9"H x 6"D.  $159.00. (1790261)

Back to Top

Radio Attic Home   |  Radios for Sale   |  Go to Greg Van Beek's Nostalgia Radio Attic

Radios for sale at the Radio Attic are offered by independent sellers and not by the Webmaster.
Sellers are identified at the top of each page.  You must directly contact the seller to purchase a radio.
© 1999, 2024  Radio Attic